background image

Operation 

 

Vacuum Pump System SC 920G 

20 

Translation of original Operating Instructions, English, KNF 121308-121311 07/18 

 

DANGER 

 Uncontrolled operation may result in personal injury 

and damage to the vacuum pump system. 

 

When using several vacuum pump systems, there is 
the danger of confusing them, which can result in 
undesired interference into other processes: The 
transmission of commands from the wrong hand 
terminal for the vacuum pump system may trigger an 
uncontrolled response in the vacuum pump system 
that the terminal controls. 

 

  Every time a vacuum pump system is used with 

a hand terminal, it is essential to ensure a 
correct match between the two components. Use 
the paging function for this purpose (see 
Actuating the vaccum pump system, page 29). 

  Additionally it is possible to use color stickers to 

indicate which hand terminal belongs to which 
vacuum pump system (see chapter 

11. Ordering 

information

). 

 

 

WARNING 

 Uncontrolled operation may result in personal injury 

and damage to the vacuum pump system. 

 

If the wireless connection between the hand terminal 
and vacuum pump system is broken, the vacuum 
pump system will continue to operate with the cur-
rent settings. 

 

  Immediately determine and remove the cause of 

the interruption between the hand terminal and 
vacuum pump system (chapter 10, page 40). 

  If you are not able to reestablish wireless 

contact, replace the hand terminal back to the 
vacuum pump system (chapter 8.1.1, page 23)
The vacuum pump system can also be operated 
directly and the ventilation valve and coolant 
valve can be opened and closed directly 
(chapter 8.2, page 32). 

 

 

WARNING 

 Personal injury caused by poisoning or explosion 

and damage to the vacuum pump system. 

 

  Make sure that no reactive or explosive mixtures 

will be produced when ventilating the vacuum 
pump system through the air inlet. 

 

Summary of Contents for SC 920G

















































Reviews: