KNEGT 404G2 Series, Operation Manual

Page: 68 / 105

404G2
SERIES TRACTOR OPERATION MANUAL
66
As Fig.6-2 shows, when assembling the clutch, make sure the clearance between release
bearing and release rod be 2mm
，
namely the clutch pedal free path should be about
25mm.
When adjusting,first,unscrew the adjusting nut 1 and 5, adjust the
Clutch pull rod with a
wrench at the position of mark ‘a’to insure the pedal free path to be in the stated range,
tighten the adjusting nut 1 and 5, then adjust the
Clutch pedal hold down bolt
3 to make sure
the clearance between release bearing and release rod,and adjust the adjusting bolt 7 to
make sure the
Security switch
is in the open position at the same time, at last, tighten the
adjusting nut 2 and 6.
Fig 6-2
1. Adjusting nut A 2. Brake pull rod 3. Adjusting nut B 4.Connect cannula 5. Adjusting nut C
6. Adjusting nut D 7. Pull rod head part A 8. Adjusting nut E