44
8. Control
8.2 Selecting product files
A specific product file is saved for every grinding
task. This product file must be selected and loaded
before grinding in automatic mode.
This is done as follows:
Press “F2 Prod. selection” (8-2/1) on the touch
panel. A new window (8-3) will open.
Select the required product file; it will be under-
lined in blue.
Load the product file to the controller via the
“F4 Activate” (8-3/1) touch panel button.
The program will switch back automatically to the
main screen.
The new product file will appear on the “Product”
line (8-4/1). The new parameters are now loaded
by the controller.
Figure 8-4
Main screen
Figure 8-2
Main screen
1
Figure 8-3
Selecting product file
1
1
