25
Figure 7-9
Swiveling the circular knife grinding
attachment
1
2
1
7.1.2 Positioning the circular knife on the grinding wheel
Swivel the grinding arm with the clamped circular
knife forwards onto the grinding wheel.
The cutting edge of the circular knife (7-7/1) must
be approximately 15 mm in front of the center of
the grinding wheel.
To do this, loosen the lower clamping lever (7-8/1)
counterclockwise and move the entire grinding
attachment (7-8/2) until the cutting edge of the
circular knife is approx. 15 mm in front of the
center of the grinding wheel (see figure 7-7).
Retighten the lower clamping lever (7-8/1).
7.1.3 Swiveling the circular knife grinding attachment
Loosen the two terminal screws (7-9/1) on the
mounting head counterclockwise with a 6 mm
hexagon screwdriver.
Swivel the mounting arm clockwise until its edge
lies on the center marking (7-9/2) of the mounting
head.
7. Operation
Figure 7-8
Positioning the circular knife on the
grinding wheel
Figure 7-7
Positioning circular knives on the
grinding wheel
1
1
2
