Operation Unit
Minus Button
RECIPE Button
If you press the button, the kneader will
move back to the previous process.
BACK Button
FORWARD Button
START/STOP Button
It is possible to subtract from
the set value of the speed/time
if you press the
button.
If you press the
button,
the kneader will move on to the
next process.
It is possible to change the recipe number if you press
the button during the standby screen.
Plus Button
It is possible to add to the set value of
the speed/time if you press the
button.
If you press the button, the kneader will start; if you
press the button again, it will stop (the blade and the time
will stop).
AUTO/MANU Button
If you press the button, the kneader will switch between automatic and manual operation.
Manual Mode: This is recommended for those who wish to check the kneading and fermentation
state for each process
Automatic Mode: This is useful for when using the same recipe in succession
5
5
Degassing Process
Fermentation and Maturation Process
The finished process will light up and the process in running will flash.
If you stop a process with the button, the process in running will light up,
but the flashing will resume by pressing the button.
The kneader will run in automatic operation until all the processes are complete
when this is lit up.
When the cumulative operation time exceeds 2,000 hours,
this will light up.
We recommend you carry out maintenance when this lights up.
Explanation of the Display Screen
The number displayed first when switching on the power is
the cumulative operation time.
Display Example:
This indicates that the cumulative operation time is 2,000 hours.
Cumulative Operation Time Display
Process Progression Display
Inspection Mark
Blade drive display
The speed is displayed in five levels.
The displayed blade will also rotate during rotation.
Kneading Process
Hydration and Maturation Process
The recipe number will be displayed when this is lit up.
This will flash while in operation.
This will flash while stopped.
This will flash when the pot or the domed pot cover have not been attached.
The kneader will stop for each process and a buzzer will sound to inform you of this
when this is lit up.
It is possible to change the content of the recipe when this is lit up.
6
6
6
