Kneader for Bread Preparation
Attach the power cord to the body of the kneader
and then insert the plug into the outlet
1
Attach the pot cover to the pot
4
Please use a 220V outlet for the power source.
Overloading electrical outlets is dangerous, so
please do not do this.
Put in the ingredients and then firmly attach
the pot cover to the pot.
Attach the pot to the body of the kneader
2
Please insert the bottom of the pot into the pot mounting holes on
the body of the kneader and then firmly turn until it is set in place in
the “LOCK” direction (see the label affixed to the body of the
kneader).
(The kneader will not start if the pot is not sufficiently fixed in place.)
1
2
Attach the blade to the pot
3
*This procedure is the same for the Whisking
Blade and the Mixing Blade
Half-circular
opening
△
mark
1
2
△
mark
Disc shaft
○
mark
1. Place so that the triangle marks (
△
) at the
semicircle opening of the blade and disc shaft
point to each other.
2. Turn the blade counter-clockwise to a right angle (90°).
3. Installation is complete when you see the circle mark
(
○
) in the blade’s semicircle opening.
4. To remove, follow the same instructions in reverse order.
You can remove after turning back at a right angle (90°)
until the triangle mark (
○
) is visible again.
9
9
9
