54
Troubleshooting
BlueShadow Detector 50D Instructions V7659
System message
”Invalid
parameter(s)“
Check the validity of the parameters .
”Invalid time in time
table”
Correct the time entry .
”Invalid time table
index“
Change the entry in the program line .
L
”Link is loaded“
First unload the link then change the link or
delete it .
“Link is running”
Wait until the link has been completed, then
change the link or delete it .
N
”No link available“
Create a link and edit it .
”No link available,
pls edit link first“
Create a link and edit it .
”No time table to
start“
Edit or enter a time table .
”Not enough space
to store link“
Check the detector . Check the number of pro-
gram lines . A maximum of 50 program lines are
possible .
”Not enough space
to store program“
Check the detector . Check the number of pro-
gram lines . A maximum of 50 program lines are
possible .
P
”Program does not
exist“
Create a program .
”Program is
running“
Quit program or wait until program has been
completed .
S
„Scan is already
active“
Cancel scan procedure or wait until scan proce-
dure has been completed .
T
”This link is used in
Wake up“
First quit or delete wakeup program
(wu = Wake Up), then edit or delete link .
”This program is
used in a link“
First pause or delete link, then edit or delete
program .
”This program is
used in Wake up“
First quit or delete wakeup program (wu = Wake
Up), then edit or delete pro gram .
”Time already
exists“
Correct the time entry .
”Time table is not
active“
The device is in
Standalone mode, no pro gram
is running . If you try to quit a non-existent pro-
gram sequence, this message appears .
