Version 2018-11
Technical Data are subject to change without notice!
8
Shaft Installation
2 layers of the special ferrite tape around the shaft
Fix with 2 layers of mounting tape around the shaft
Coil, depends of shaft diameter 4-25 parallel windings of
0.5 CUL wires, see table for help.
Solder the wires of the coil on the input pins of
TEL1-PCM-
STG “COIL”
Strip the isolation from the end
of the wire with a skinning tool or
head up you soldering iron over
450°C to burn off the insulation
from the wire!
