MobilSwitch-Micro-C
Industrial GSM signalling and remote control module
with 2 inputs and 2 high current relay outputs
The
MobilSwitch-Micro-C
module is a general, industrial-grade GSM module, developed for remote
signaling and remote control. It has
2 inputs
which are activated by voltage-less contact, and it has
2
high
voltage and high current
relay outputs
. It can be programmed with its own software called "
Unified
" from
any PC or notebook. The device notifies the users via pre-configured SMS-s and voice calls, and it has an
optional acknowledging function. The relays can be triggered by user-configured SMS-s or free voice calls
for dedicated users. The relays can be configured to operate in
monostable
mode (after switching on, the
relays are turned off automatically within a time interval) or
bistable
mode. (switching the relays on and off
are performed with separate commands). It can be programmed for max.
8 phone number
s, and can be used
as a GSM remote signaling, remote controlling device, either for industrial purposes or home applications,
such as remote signaling and controlling security device. The power supply of the device has industrial input
range of
1
0V-30V DC
and draws min.
500mA
current. The carrier's SMS-s can be forwarded to the user-
configured phone number, and the device operation can be checked with its built-in signal-of-operation
function. It has two variants: either with built-in aerial or
RG-174
magnetic aerial with
SMA
connector.
1. Operation:
The module holds its configured and
programmed data even after power-off. In
the case of carrier problems or cellular
signal loss, the device switches itself off
then on, re-connects to cellular network
and restores normal operation. The device
comes with an enclosure and carrier-
independent GSM module in DIN rail
enclosure with a small SMA connected
aerial or with external magnetic antenna.
The device comes with our free
configuration software that can be down-
loaded from website:
www.seasoft.hu
Our devices can be configured with any
PC-s with a single
micro-USB
cable. The
MobilSwitch-Micro-c
has a carrier-independent, industrial-grade
GSM module that can be operated with any prepaid or subscription-based
nanoSIM
cards. The low voltage
low-current variant is called
MobilSwitch-Micro
, or
Micro-a
and available also with two antenna-variations.
SeaSoft kft.
www.seasoft.hu www.mobil-control.eu
T: (62) 406-405 M: (+36) 30 255 7688 F: (62) 405-969
