KMR 3535, Technical Data Spare Parts

Page: 4 / 36

4 I English 3535
1 TECHNICAL DATA
Type 3535
Dimensions mm 410/540
Weight kg (without fasteners) 6.4 kg
Single sequential actuation
Recommended operating pressure
range
5-8.5 bar/
0.5-0.85 MPa
Maximun permissible operating
pressure 8.5 bar/
0.85 MPa
Air consumption per driving
operation 6.2 l at 6
bar / 0.6 MPa
Magazine capacity No. of fasteners
56 - 75
Penetration depth setting
no
Fastener: Plastic bound nail
Nail length mm
80-130
Nail shank Ø mm
3.1-4.2
Recommended lubricant
1 litre special oil. Code No.
9 4420
250 cm3 grasa especial. Code No.
68 3868
2 NOISE / VIBRATION INFORMATION
Noise characteristic values * 3535
A-weighted single-event emission
sound pressure level at work
station L pA, 1s
93 dB(A)
A-weighted sound power level
L WA, 1s, d
106 dB(A)
Vibration characteristic values **
Weighted r.m.s.-acceleration (a)
4.8 m/s2
The noise level when working can exceed 85
dB (A). Wear ear protection!
*
**
Measured values determined according to
EN 12549:1999.
Measured values determined according to
ISO 8662-11:1999.
3 SUP PLIED WITH
1
1
1
4 F ILLING THE MAGAZINE
O nly those fasteners specified under technical data
(see 1) may be used.
When filling the magazine, hold the tool so that the
muzzle is not pointing towards own body or towards
any other person.
Do not load the tool with fasteners with the safety
yoke or trigger depressed.
Pull pusher back until it has reached the point where
there is noticeable resistance and it catches. Introduce
2 nail strips into the magazine, unlock pusher and lead
it against the nail strip. Make sure that the nail strips
lie correctly in the magazine and that the pusher nose
reaches over the head of the last nail. Never should
the pusher be allowed to snap forward in a magazine
which is half or totally empty. Always guide it by hand
up to the nail strip or stop.
5 ACCESSORIES
Code No.
Suspension 73 3841
Balancer for 60-80 N (6.0-8.0 kp),
cable travel 2.0 m
73 0715
Strip magazine Nailer
Tool use and safety instructions
Technical data sheet
KMR