3
RJ–12
Conn.
Network
Switch
Isolation
Lamps
Input/EOL
Switches
RST Jumper
Power
Jumper
Terminal Connections
Lock Tab
Conduit
Plate
Illustration 3. KMD-7002 Controller Connector Detail
Illustration 4. KMD-7003 Controller Connector Detail
RJ–12
Conn.
Network
Switch
Terminal Connections
Lock Tab
Isolation Lamps
Input/EOL
Switches
RST Jumper
Power
Jumper
Conduit
Plate
Installation
This section provides important instructions and guidelines for installing the
KMD-7001, 7002 and 7003 series controllers. Carefully review this information
prior to attempting installation.
Preparation
Prior to mounting the controller, the rotational limits must be set using stop pins.
These settings limit the shaft rotation in the clockwise (CW) and counterclock-
wise (CCW) directions. (Refer to Illustration 5.)
