KMC Controls KMD-5551E, Application Manual

Page: 44 / 58

Discovered (Use Learned Networks not enabled) The learned network number at a
port. If this network number is different than the network number on the Configuration
page the number is in red and the status will be other than Active. Other networks are
listed as N/A.
Next Router A list of each network connected to the router's ports that will be used to route
a message to the next router.
l
Network The BACet network number to the next router.
l
Address The MAC address of the next router.
Time The elapsed time since the status update.
Idle Time The elapsed time since the last traffic was passed to the network by the router.
Status Icon Description Action
Active The network is
functioning correctly and
capable of passing
traffic. None required.
Busy The amount of network
traffic is high enough
that no new traffic can
be accepted. A temporary condition
that does not require
intervention.
Down
Gone The network is not
functional and is
rejecting traffic. Most likely will require
manual intervention.
Conditions that cause
a network to be down
may include either LAN
or BACnet router
problems.
No Status
!
The router is searching
for the network. Usually a temporary
condition. Does not
require intervention.
Duplicated Network
D
Two networks are using
the same network
number. A router cannot
pass traffic on a
duplicated network. Usually requires
intervention to locate
and change the
duplicated network
number. Multiple
duplicated networks
are usually an
indication of a network
loop.
Table 4–1 Route status conditions
Section 4: Setting up translation KMC Controls, Inc.
44 Revision B