manualshive.com logo in svg

KMC Controls KMD-5551E, Application Manual

Share
Download
KMC Controls KMD-5551E Application Manual Download Page 42

BACnet columns

Lock Instance

When selected, the assigned Device Instance will not be changed when

automatically assigning device instance numbers to KMDigital controllers.

Device Instance

For Tier 2 controllers this assigns a number that identifies the controller on

the BACnet internetwork as a BACnet device. The device instance must be unique on the
internetwork and in the range from 0 to 4,194,302. For Tier 1 controllers the device instance
is shown only for information. See the topic

Configuring the KMD Virtual Port

on page 39

to

change the device instance for a Tier 1 controller.

MAC address

For Tier 2 controllers, this field assigns a MAC (Media Access Control)

address to the Tier 2 controllers for the virtual network. This must be unique on the virtual
network and in the range from 0 to 255. For Tier 1 controllers the MAC is shown only for
information. See the topic

Configuring the KMD Virtual Port

on page 39

to change the MAC in

a Tier 1 controllers.

Routing Status page

The KMD-5551E translator includes BACnet routing functions. References to the router and
routing in this topic refer to the BACnet routing functions and networks, including the BACnet
virtual network, within the translator. The status of the KMDigital networks, controllers, or
points are not included on this page.

The Routing Status page contains a network status list and command buttons to update the
display and networks. The page consists of three major parts.

l

Send commands to the router with the

Route Status buttons

on page 43

.

l

View the status of networks in the

Route Status list

on page 43

.

l

Clear selected networks by

Purging the Route Status list

on page 46

.

Refresh

Click to refresh the Route Status list. To automatically refresh the list every 10

seconds, select the

Auto Refresh

check box.

Illustration 4–2 Routing Status page

Section 4: Setting up translation

KMC Controls, Inc.

42

Revision B

Summary of Contents for KMD-5551E



























































Reviews:

No comments

Brands by name

Popular brands

Load more brands