Assembly Instructions
Note: To assemble easily and successfully, please keep the bolts 70% of tightness while installing the parts,
then fasten all the bolts and nuts fully after finished assembly.
Step 1. Connect 2pcs left stand tube (Part I) and cross bar tube (Part K) together, then secure them with bolts
(Hardware C). Connect 2pcs right stand tube (Part J) and cross bar tube (Part K) together, then secure them
with bolts (Hardware C).
Step 2. Connect the 2pcs parts of step 1 and the base tube (Part L) together, then secure them with bolts, nut and
washer (Hardware A,D,H).
Step 3. Connect the part of step2 and top frame (Part M) together, then secure them with bolt, nut and washer
(Hardware B,E,G).
Step 4. Insert the 4pcs weight bars (Part N) into the hole of stand tubes, then secure them with bolt and washer
(Hardware C,F).
FOR AU/NZ: IMPORTED FOR KMART STORES IN AUSTRALIA AND NEW ZEALAND.
Made in China
WARNING:
1.
T
he product must be placed on a hard, flat surface, cover the floor
with carpet to prevent damage to the ground.
2. Check the parts and tighten all bolts and nuts regularly, never use
the product if all components are
NOT
fully secure.
3. Always keep children away from the product unless they are
supervised by an adult.
4. Wipe clean with damp cloth. Do not use abrasive materials or
solvents.
5. Always store the product on a flat surface, and in a dry and well
ventilated area.
