KMART 43033430, Owner'S Manual

Page: 9 / 24

Parts Assembly
7
Handlebar Installation
Stem(1) and fork(2) are pre-installed.
The stem (1) is installed upside down for packaging and must be adjusted
before assembly handlebar.Turn the fork so it faces forward.
Make sure that the stem(1) is pointing upward and facing the same direction as
the fork(2) and brake calipers(3) are facing forward.
1
2
3
A
X 2
Steps:
1. Remove Screws (A) and Stem
Clamp Half (5).
2. Place Handlebar (4) centered
into Stem and install Stem
Clamp and Screws hand tight.
3. Position Handlbars so they are
comfortable for the rider.
4. Tighten Screws securely and
evenly.
5
A
4
Note: Please do not
assembly in wrong
direction.