KMART 43033430, Owner'S Manual

Page: 15 / 24

NOTE: There is a pedal marked “R” and a pedal marked “L”.
• The pedal marked “R” has right hand threads. Insert it
into the crank arm on the right side. Tighten it in a
clockwise direction.
• The pedal marked “L” has left hand threads. Insert it
into the crank arm on the left side. Tighten it in a
counterclockwise direction.
• Make sure both pedals are threaded fully into the
crank arm. Tighten the pedals to ensure they will
not come loose.
Note:
A Pedal Wrench is preferred for attaching Pedals.
An open-end wrench can also be used as shown.
Parts Assembly
Pedal Installation
NOTE:
There is a pedal marked “R” and a pedal marked “L”.
WARNING
: Pedals must be
suf fi ciently tightened to ensure they do
not come loose.
22
21
R
L
13