KMART 43033430, Owner'S Manual

Page: 14 / 24

Parts Assembly
27
X 8
28
X 4
26
X 4
Front Wheel Installation
TURN UNIT
UPSIDE DOWN
26
27
25
25
30
A
B
24
27
28
R
Steps:
1. Place a Wheel Bushing (25) in each
fork end as shown next page.
2. Make sure Right Crank is on the
Right side of the unit.
3. Place Wheel (30) so that both Bearings
(A) set in the Wheel Bushings.
4. Make sure Wheel Spacers (B) are
centered in the Fork.
5. Place a Wheel Bushing on top of the
Axle as shown, on both sides.
6. Place a Wheel Retainer (24) on
each fork end as shown.
7. Install 2 Bolts (26) and Washers (27)
through fork ends and Wheel Retainers.
8. Install Washers (27) and Nuts (28)
as shown.
9. Tighten 4 Nuts securely and evenly.
Make sure Wheel spins freely.
12