Technical specifications
MPN
Device
Type
Reference RMS
AC input
Speakers
Driver
Reference RMS
Frequency
Impdedance
Sensitivity
Signal to noise ratio
Total harmonic distortion THD
Connectivity
Connection type
Audio input ports
Wireless range
Wireless frequency
Additional information
Dimensions
Weight
Cable length
Warranty
Wireless 5.1-channel soundbar system
300W
110-220V 60Hz/50Hz
Subwoofer: One 6.5in driver
Satellite: Two 3.5in drivers
Tweeter: Six 2.25in drivers
Subwoofer: 125W
Satellite: 100W
Tweeter: 75W
Subwoofer: 20Hz-170Hz
Speakers: 120Hz-20KHz
Subwoofer: 4
Ω
Satellite: 8
Ω
Tweeter: 8
Ω
700mV
≥
60dB
≤
1 %
Bluetooth
®
compatible, USB, SD™ and tuner
Optical digital, RCA stereo, six single RCA
33ft
2.4GHz
Subwoofer: 13.7x9.8x11.5in
Satellite: 5.3x9.8x4.8in (each)
Soundbar : 2.5x38x2.5in
17.6lb
Power cable: 5ft
Auxiliary cable: 3.6ft
Digital optical cable: 10ft
One year
KSB-500
• Do NOT drop, hit or shake the device.
• Do NOT disassemble, repair or modify the portable speaker yourself.
• Do NOT use cleaning products that contain benzene, solvents or alcohol.
• Do NOT expose the speaker to excessive heat or to direct sunlight for long periods of time.
• Do NOT place heavy objects on top of the portable speaker.
• Do NOT use near a microwave oven or wireless LAN products.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC statement
Precautions
Summary of Contents for Zaffire KSB-500
Page 1: ...KSB 500 Zaffire...
Page 10: ...NOTES NOTAS...
