KlipXtreme Zaffire KSB-500, Manual

Page: 3 / 11

Back panel
Connector Descrption
1. Antenna
2. Optical audio port
3. AUX input
4. RCA inputs
5. Speaker output connectors
6. Main power switch
7. AC power cord
Buttons Description
1.
Power
button
2.
Mute
button
3.
Source
button
4.
Pro Logic
5.
Select
button
6.
LED
button
7.
TUNE
- /
TUNE
+
8.
VOL
+ /
VOL
-
9.
11. Numbered keypad
Remote control
10. /
1
3
4
5
2
6 7
Picks up the signal for the tuner
Provides the connection of sources equipped with digital
audio ports
These RCA jacks allow the connection of audio devices
fitted with RCA and 3.5mm inputs when using the
adapter
Provide the connection of additional audio sources with
true 5.1 surround sound capability
(cables not included)
Connect satellites and the soundbar in this terminal block
Turns the speaker on and off
Insert the power cord plug in an AC outlet
In addition to the top panel keys, an infrared remote control is included which provides
additional functions to allow greater control over the media player.
1. Install the supplied batteries in the remote control following the correct polarity as indicated
inside the compartment.
2. In order for the remote to operate properly, ensure that it is pointed toward the front of
the speaker.
Press this button to alternate between the standby and active
modes on the device
Silences the audio coming from the speaker. Press it again to
unmute the speaker
It replicates the function of the source button on the main unit
This button switches the decoder between 2.1 and 5.1 audio
channels
Selects the front, rear or center speaker to adjust its output level
individually using the volume keys
Briefly press this button to cycle through the six different lighting
patterns, and also to disable this feature
Press these buttons to decrease or increase the frequency in
steps of 0.1MHz
Press and hold to scan downwards or upwards, and tune the
next available channel automatically
Press these buttons to increase or decrease the output volume
of the speaker
In USB,
SD
™
or
Bluetooth
®
mode, briefly press this button to
start and pause media
In tuner mode, press and hold this button to start the automatic
search and storage of channels found in the band with a strong
broadcast signal
In
Bluetooth
®
mode, press and hold this button for several
seconds in order to put the speaker back into pairing mode
In USB,
SD
™
or
Bluetooth
®
, press any of these buttons to select
the previous or next track on your play list
In tuner mode, it will scan downwards or upwards to the next
memorized channel
Press any key from 0 to 9 on the remote to choose directly the
tracks or channels you want to play It works in FM and USB
modes
2
11
4
6
8
1
3
5
9
7
10