KlipXtreme UltraBoom Portable KLS-875, Manual

Page: 3 / 13

Back panel
Allows the selection and control of the available audio sources: LINE-in,
Bluetooth ®
,
SD
TM
, USB and tuner. The mode symbol illuminates when the selected source is
playing.
MODE:
Press this button to cycle through the different audio sources. As there is no
default mode assigned, the system starts playing automatically the last media source
inserted
: Plays and pauses the USB, SD
TM
, or
Bluetooth ®
source. In tuner mode, press and
hold for 2 seconds to initiate the scanning of channels from the lowest up to the
highest frequency, and store them automatically as presets in the memory
: Repeats the current playing USB or SD
TM
track (
ONE
), repeat all of the tracks
(
ALL
)
PREV:
1. Plays the previous
Bluetooth
®
, USB or SD
TM
track. In tuner mode, this
button will tune down to the previous channel when briefly pressed.
2. Press and hold this button to decrease the volume.
NEXT:
1.Plays the next
Bluetooth ®
, USB or SD
TM
track. In tuner mode, this button
will tune up to the next channel when briefly pressed.
2. Press and hold this button to increase the volume.
: Press the button to go to the previous folder.
: Press the button to go to the next folder.
EQ:
Scrolls trough the diferent equalizer sound effects
Control Description
1. LCD display
5. Master volume knob
11. Voice Control Volume
(VCV) switch
14. Mix out and Line
in jacks
17. AC input
4. Media panel
6. Bass knob
8. Echo knob
7. Treble knob
9. Mic. volume knob
13. Mic. 1 / Guitar
10. Mic.1/Guitar input
18. DC in
20. RF A LED / Knob
15. Aux input
16. Power switch
12. Mic. 2
2. USB port
This screen displays the selected input mode:
Bluetooth
®
, USB, SD
TM
and tuner
Note:
Remove the plastic protector film from the LCD display before use
Connect your USB flash drive to play MP3 and WMA music files
3. SD
TM
card slot
Insert your SD
TM
card here to play MP3 and WMA music files
Controls the overall audio level from all inputs. Turn it counterclockwise to lower
the volume. A clockwise rotation will increase the volume level of the speaker
Increases or decreases the bass (low) frequencies of the speaker at a range between
-12dB to +12dB
Increases or decreases the treble (high) frequencies of the speaker at a range
between -12dB to +12dB
Adjust this knob to control how much of an echo effect is applied to the signal
from the wireless microphones and the microphone inputs
Controls the audio level of both wireless microphones and wired microphone Mic. 2.
Accepts the input from a wired microphone
Accepts the input from a wired microphone or guitar
Connect an active (powered) speaker, a CD player, digital media player, mixer
or other media source to these left and right RCA output and input connectors
Controls the audio level of wired microphone Mic. or Guitar
Connect a CD player, digital media player, a mobile phone or other audio source
to this 3.5mm stereo line-in connector
Turns the power on and off.
Plug the supplied power cable in this jack
Accepts the connection of an external 12V battery to extend the
loudspeaker's run time
19. Power/Charge LED When only one LED is lit it means that the battery voltage is low
Indicator light and volume control for wireless microphone A
21. RF B LED / Knob
Indicator light and volume control for wireless microphone B
22. VHF LED /
Power button
Indicator light and button to turn the VHF wireless microphones on or off
The VCV switch activates the microphone talk over feature. If enabled, it prioritazes
the microphone by silencing music playback when there is an announcement through
microphone. When this switch is off, the speaker volume remains constant
CHARGE LEVEL IS AT 25% OR LESS.
CONNECT TO AC
CHARGE LEVEL IS TA 75% CAPACITY
FULLY CHARGED
CHARGE LEVEL IS AT 50% CAPACITY