KlipXtreme UltraBoom Portable KLS-875, Manual

Page: 5 / 13

IMPORTANT:
V. Advanced operation
Pairing the speaker with wireless devices
Always ensure that the speaker unit is the last thing to power-up, and the first thing to turn off when
operating your complete system.
Note:
Before installing this product, please make sure your device has the built-in
Bluetooth
®
feature
available. If your device is not
Bluetooth
®
-enabled, you must purchase a
Bluetooth
®
dongle, preferably
version V.3.0 or above.
Make sure that the power switch on the speaker is set to
ON
.
Enable the
Bluetooth
®
feature on your audio device and set it to discover the wireless speaker.
Remember to place your wireless device and the speaker not more than one meter away from each other.
Next, cycle to the
Bluetooth
®
feature on the speaker by pressing the
MODE
button found on the main unit or
the remote control. The
Bluetooth
®
symbol starts blinking fast on the display to indicate that the speaker has
entered into the pairing mode.
Once the speaker appears listed under the newly found
Bluetooth
®
devices (
KLS-875
) of your wireless device, it
will ask if you want to pair with it.
Accept by pressing
Yes
or
Ok
. If you have a lower
Bluetooth
®
version, you may be prompted to enter the
passkey
0000
(4 zeros).
When pairing is successful, the
Bluetooth
®
symbol stops blinking and appears steady on the display.
If after 60 seconds the pairing process fails, please repeat steps 1 through 6 described above.
You can now start streaming audio through the speaker wirelessly from your favorite
Bluetooh
®
-enabled devices.
1.
2.
3.
4.
5.
6.
7.
8.
VI. Troubleshooting
If the sound is distorted:
try lowering the volume control of your sound source or musical instrument. Also,
try to reduce the overall volume of the speaker.
If there is too much bass:
try adjusting the tone or EQ control from speaker or your sound source to lower
the bass level. This will allow you to play the music louder before clipping (distortion) occurs.
If there is a high-pitched whistling noise when using a microphone:
this is probably feedback. Point the
microphone away from the speaker.
If you can’t hear the microphone over the music volume:
turn down the music volume from your source.
When PREV or NEXT fails to tune to the next radio station:
press the
MODE
button to tuner. Press the
button to automatically tune a station. Press PREV to tune to the previous station, press NEXT to tune to
the next station.
If the radio station channel is flashing:
the unit is currently muted. Unmute to stop the LED from flashing
and resume playback.
If the b LUE icon blinks fast:
it means that the unit is currently in
Bluetooth
®
pairing mode.
If the b LUE icon blinks slowly:
the
Bluetooth
®
music playback is muted. Unmute to resume playback.
The USB track # (example: 001) blinks slowly:
the USB drive music playback is muted. Unmute to stop the
track indication from flashing and resume playback.
Warning:
This is an extremely powerful loudspeaker capable of generating sound pressure levels (SPL)
sufficient to cause permanent hearing damage to anyone within normal coverage distance. Exercise caution
to avoid prolonged exposure in excess of 90dB.
Technical specifications
•
•
•
•
•
•
•
•
•
Device
MPN KLS-875
Speaker
Microphone
Connectivity
Battery
Additional information
Type
Maximum power output (reference RMS)
Maximum power output (P.M.P.O)
DC input
Driver units
Frequency
Impedance
Sensitivity
Signal-to-noise ratio
Directivity
Frequency
Impedance
Sensitivity
Connection type
Memory card slot
USB port
FM tuner
Source inputs
Outputs
Wireless RF frequency
Wireless range
Battery type
Battery charging time
Battery run time
Battery standby time
Battery charging method
Additional power source
Dimensions
Weight
Cable length
Warranty
Party loudspeaker system
200W
2000W
12V
15-inch subwoofer plus 1-inch tweeter
Subwoofer: 20Hz-100Hz
Tweeter: 120Hz-20kHz
Subwoofer: 4
Ω
Tweeter: 6
Ω
89dB±3dB
≥
70dB
Omnidirectional
50Hz-13kHz±3dB
600
Ω
12dB (-95dBm)
Auxiliary and
Bluetooth ®
compatible
Yes
Yes
Yes
3.5mm line-In / two 1/4-inch stereo inputs / RCA line In
RCA mix line out
2.4GHz-2.480GHz
66ft
12V/7.1A lithium cell
8-10 hours
20 hours*
24 hours
Direct charger through power cable
12VDC external battery connection
19x15.7x29in
38.7lb
4.9ft
One year
*Approximate battery run time depending on usage and volume settings.