2. The clamp provides two positions depending on the thickness of your desk (from 10 to
83mm). The top screw hole is designed for thinner surfaces, while the bottom hole will fit
tabletops with thicker edges. Proceed to fix the bottom plate of the C-clamp with the
supplied screws based on the mounting depth needed, as illustrated below.
3. Slide the clamp base onto the edge of your desktop in your desired location. Tighten the
locking knob until the mount is securely attached to your desk surface.
Option B – Grommet mount
1. This option requires a hole through the mounting surface. After making sure the grommet
mount is facing up, insert the M8 screw through the square hole in the center of the
grommet mount.
2. Attach the grommet mount to the base with the three supplied screws. Use the allen key
to tighten the screws to the base.
Summary of Contents for KPM-312
Page 7: ......
