IMPORTANT:
At least two qualified people should perform the assembly procedure. Personal injury and/or
property damage can result from dropping or mishandling the display.
Mounting surfaces must be sturdy and flat.
Do not install this product on a weak, uneven surface, prone to vibration or susceptible to
other movements. Reinforce the structure as necessary before installing the mount.
Supported monitor weight:
Min 4.4lb / Max 14.3lb
The combined weight of all components shall not exceed the rated load capacity of the
mounting arm.
2. WARNING!
• Prior to installing this product, you must read all instructions thoroughly. Keep these installa-
tion instructions in an easily accessible location for future reference.
• Safety measures must be practiced at all times during the assembly of this product. Use
proper safety equipment and tools for the assembly procedure to prevent personal injury.
As arms are under tension and may suddenly spring upwards, keep them
to their highest position when removing the monitors. Failure to do so
may cause personal injury and equipment damage.
• Klip Xtreme does not warrant against damage caused by the use of any Klip Xtreme mounts
for purposes other than those for which it was designed or damage caused by unauthorized
attachments or modifications, and is not responsible for any damages, claims, demands, suits,
actions or causes of action of whatever kind resulting from, arising out of or in any manner
relating to any such use, attachments or modifications.
Max load 14.3lb
(each monitor)
6.5
kg
Label
G
H
I
J
K
M-A
M-B
M-C
Item
M8 wing nut
M8x105mm screw
Flat clamping plate
4mm allen wrench
5mm allen wrench
M4x12 screw
M5x12 screw
D5 metal flat washer
Quantity
1
1
1
1
1
4 (per arm)
4 (per arm)
4 (per arm)
Image
3. Product diagram
4. Desktop installation
Notes:
• The monitor mount allows two installation configurations.
It may be clamped to a desk or table, or mounted through a grommet hole. Instructions for
both will be provided in the following sections.
• First, decide where you prefer to place your monitors. Prior to attaching the mount to your
desk, make sure you have enough room to fit the entire assembly either behind or in the
cable hole area of your desk, depending on the mounting method you choose.
Option A - C-clamp mount
1. First, attach the C-clamp top plate tto the mount base using the supplied three mounting
screws and tight them firmly with the 4mm allen key.
115mm
75mm
100mm
+90˚
+45˚
min160mm - max410mm
10mm-83mm
98mm
55mm
160mm
50mm
225mm-290mm
75mm
100mm
117mm
±
360˚
±
360˚
±
360˚
±
180˚
Summary of Contents for KPM-312
Page 7: ......
