Recommendation:
Use an SD™ card to enable audio playback from compatible files stored in an SD™ memory card.
a. First, connect an SD™ card to the SD™ port of the speaker.
b. The speaker will detect the SD™ card and play the audio files. If the SD™ card is not automatically detected,
press the
MODE
button to toggle through the different modes available until the preferred mode is found:
Line In,
Bluetooth
®
, USB, SD
TM
, FM.
c. Start streaming audio files directly from the source of choice.
d. Press the button to play or pause the audio.
e. Press the button shortly to go to the previous or next track.
e. FM (radio) mode
3. SD
TM
mode operation with the remote control
1. Press the
MODE
button briefly to toggle through the available audio sources and select an FM station.
2. Press the
Play/Pause
button on the speaker or
SCAN
on the remote to start searching for radio stations
automatically, in the radio frequency range between 87.5 and 108.0 MHz. The unit can store 20 radio
stations. To play any of the stored radio stations directly, press a number button on the remote.
f. How to use the recording feature
1. First, connect the microphone, a compatible memory card or USB drive on the speaker.
2. The unit will automatically switch to the USB or SD™ mode (depending on source inserted) as the default
one to save the recording.
3. Press the
REC
button on the speaker until
REC
is displayed on the screen.
4. Start recording, press the
REC
button to stop and play the recording.
V. Functionality
1. Auxiliary mode operation
Recommendation:
A 3.5mm to 3.5mm connector audio cable has to be used to enable audio playback from
devices fitted with an auxiliary 3.5mm jack.
a. First, connect one portion of the 3.5mm cable to the auxiliary port of the speaker, then connect the other side of
the cable (3.5mm plug) to the source of choice. If the speaker is not set to the
LINE IN
mode, press the
MODE
button to toggle through the different modes available until the preferred mode is found: Line In,
Bluetooth
®
, USB,
SD
TM
, FM.
b. Start streaming audio files directly from the source of choice.
2. USB mode operation with the remote control
a. First, connect a USB memory stick to the USB port of the speaker.
b. The speaker will detect the USB device and play the audio files. If the USB drive is not automatically
detected, press the
MODE
button to toggle through the different modes available until the preferred
mode is found: Line In,
Bluetooth
®
, USB, SD
TM
, FM.
c. Start streaming audio files directly from the source of choice.
d. Press the button to play or pause the audio.
e. Press the
button shortly to go to the previous or next track.
TWS audio functionality
- To test the
TWS
function,
Power ON
both units.
- Set each unit to
Bluetooth
®
mode.
- On one of the units (this becomes the master unit), press and hold the
MODE/TWS
button, until the
t-ON
message is displayed on the unit, followed by a tone emitted on both units. Units are now paired.
- Using the Smartphone, turn on the
Bluetooth
®
option and search for the speaker ID
KLS-651
and connect
(pair) to it.
- Perform the audio test (from Smartphone music library or YouTube) and ensure audio is playing on both
speakers at the same time.
- To unpair
TWS
mode, press and hold the
MODE/TWS
button until the
t-OFF
message is displayed on
the unit, followed by a tone emitted on both units. Units are now unpaired from
TWS
mode.
Note 1
: Once the
Bluetooth
®
test is done proceed to unpair the mobile device from the speaker.
Note 2:
If the speaker is in
TWS
mode when is turned off, it will still be in
TWS
mode when it is
turned on again.
1. Turn the volume control on the top panel fully counterclockwise.
2. Connect audio input devices first. Make sure all input sources such as microphones, CD players, or digital
media players are turned off and volume settings are set to their lowest settings (zero).
3. Then, connect the power cord to the loudspeaker and AC power outlet. Turn ON the speaker.
4. Slowly turn the volume clockwise until the sound output is at the desired level. If there is no sound, check
to make sure the source equipment is providing audio output.
Powering on the unit
VI. Advanced operation
Pairing the speaker with wireless devices
Note:
Before installing this product, please make sure your device is compatible with
Bluetooth
®
.
1. Enable the
Bluetooth
®
feature on the selected source and set it to discover the wireless speaker.
2. Place your wireless device and the speaker not more than one meter away from each other.
3. Next, cycle to the
Bluetooth
®
feature on the speaker by pressing the
MODE
button found on the media
panel and select it as the input source. The word
Blue
blinks fast on the display to indicate that the
speaker has entered into the pairing mode.
4. Once the speaker appears listed under the newly found
Bluetooth
®
devices
(KLS-651)
of your wireless
device, select it and wait a few seconds for pairing.
5. When pairing is successful, the word
Blue
stops blinking indicating that the
Bluetooth
®
is connected. If after
60 seconds the pairing process fails, please repeat steps 1 through 5 described above.
6. You can now start streaming audio through the speaker wirelessly from your favorite
Bluetooth
®
-enabled
devices.
7. The speaker will re-pair automatically to the memorized device when the BT mode is selected on the unit
after being turn off and on again.
5. To select and play a recording saved on a USB/SD™ device, insert the device selected and press and hold the
PLAY
button; then, press the "
Prev
" or "
Next
" button to select the recording you wish to play.
6. To delete a recording saved on a USB/SD™ device, insert the device selected and press and hold the PLAY
button; then, press the "
Prev
" or "
Next
" button to select the recording you wish to delete. Once selected, press
and hold the
REC
button to delete the recording.
Summary of Contents for Charme 2 KLS-651
Page 1: ...KLS 651 Charme II...
Page 14: ...NOTAS NOTAS...
