4. Likewise, if you want to play music directly from a flash drive, simply insert your
storage device into the USB port on the back of the unit.
5. Plug the supplied power adapter into the DC jack on the speaker. Then plug
the AC cable into the wall outlet.
6. After making sure all connections are done correctly, power the soundbar by
turning on the main switch located on the back.
Note:
Before installing this product, please make sure your device has the built-in
Bluetooth
®
feature available. If your device is not
Bluetooth
-enabled, you must
purchase a
Bluetooth
dongle, preferably version V.2.1 or above.
If you haven’t done so already, switch the soundbar on using the main switch
or the power button found on remote control. The welcome screen on
the LCD will become illuminated.
Place both devices not more than one meter away from each other.
Enable the
Bluetooth
function on your audio device and set it to discover the
wireless soundbar.
Select the
Bluetooth
feature on the soundbar by pressing the
Mode
button on
the unit or the
BT
key on the remote control.
The
bLUE
icon starts blinking on the LCD screen, accompanied by an
audible tone, to indicate that the system has entered into the pairing mode.
Once the speaker appears listed under the newly found
Bluetooth
devices
(
KSB-100
), it will ask if you want to pair with it.
VI. Technical specifications
V. Advanced operation
Pairing the soundbar with your Bluetooth device
1.
2.
3.
4.
5.
6.
Accept by pressing
Yes
or
Ok
on your mobile device. If you have a lower
Bluetooth
version, you may be prompted to enter the passkey
0000
(4 zeros).
If pairing is successful, another beep will be heard, making the
bLUE
icon
glow solid on the LCD screen.
If after 60 seconds the pairing process fails, please repeat steps 1 through 7
described above.
The soundbar will automatically re-pair with the last memorized device when
the
Bluetooth
function is re-enabled or when it is turned on again after being
powered off.
7.
8.
9.
10.
MP3
MP3
Type
Reference RMS
Sound enhancement technology
Standby mode
AC input
Driver unit
Reference RMS
Frequency
Impedance
Sensitivity
Sound pressure level (S.P.L.)
Signal to noise ratio
Wireless 2.0 channel soundbar
80W
Software control BASS enhancement
Triggered after 10 minutes of inactivity
100/240V
60/50Hz, autosensing
Four 2.5 inch drivers
80W
100Hz-20kHz
12Ω ±15%
82dB ±3dB
82dB ±3dB
≥60dB
MPN
Device
KSB-100
Speaker
