KLIPPEL KCS, User Manual

Page: 6 / 35

2

KCS Monitor Tutorial Klippel R&D System
1.3 Tutorial 1 – Starting KCS
Hardware Setup
Setup the KCS target hardware platform for KCS on-line processing.

KCS running on KA3 : See section 2.4.1. Make sure that your audio source is connected to the
IN1/2 XLR plug

KCS running on NAD : Refer to section 2.4.2 / 0 or the NAD Quick Start Guide provided by
Nuvoton. M ake sure that the output audio device on your PC is set to Nuvoton Audio
Development Platform .

KCS running on Klippel APE Evaluation Board : see corresponding user manual.
Open Initial KCS data
Initial KCS data comprising speaker and target platform parameters is required to start KCS:

Use the KCS-ID module (KA3 device required) and download the according KCS Monitor
operation from the KCS Server (see
[KCS2] Manual KCS-ID Parameter Identification)

If you are using a NAD board as KCS target platform and you have received a reference
speaker together with the hardware, initial KCS data for this speaker is provided by Nuvoton
Open the Klippel dB-Lab database comprising the KCS Monitor operation holding the initial KCS data
belonging to your speaker.
Upload KCS Data to the Hardware Device
Property page of KCS Monitor
Open the KCS Monitor’s property page by right-clicking on the operation

Properties or marking
the operation and press [Alt]+[Return].
For KCS platforms connected via a serial port (e.g. NAD), press
Scan Connected Devices to update the
available COM ports.
Within the properties window, press
‘Connect to Device’ to synchronize the KCS setup of software
module and hardware. Refer to 2.6.1 in case of any issues.