Klippel R&D System
KCS Monitor Reference
19
The relative distortion components describe the ratio of the peak values of the
equivalent input
distortion
generated by the selected nonlinearities and the peak value of the total signal.
The
equivalent input distortion
is identical to the voltage that is required to compensate the
particular nonlinearity.
2.2.7
Z(f,x=0) Impedance Magnitude
The impedance magnitude is calculated based on the identified linear speaker parameters.
2.2.8
Protection
The activation of the mechanical and thermal protection systems can be observed at any time. The
attenuation value
G cx (mechanical)
indicates an approximate value at which degree low frequencies
are attenuated. The attenuation value
G cu (thermal)
indicates the attenuation value of how much
the whole audio signal is attenuated. See more information in the tutorial
