7
01.10.2019
filtering unit
STRONG
-
5000
-
S
To
load/replace the cartridge filters
it is important to open the door
of the chamber
of filters.
Prior
to opening the door of filters chamber, necessarily disconnect the power supply!
Subsequently, unscrew (release) the plastic handles of the screw locks
(4 pieces)
– to such ex-
tent that the locks can be bent fully aside and User can open the door widely
to the right angle.
Insert the subsequent filter cartridges onto the slide-guides and push them to the wall of the
electro-valves chamber. Next turn the cartridge filter to the right (clockwise)
until the bayonet-
-joint locks. Finally, close the door of the chamber of filters and tighten up thoroughly the screw
locks. Having replaced the cartridge filters, connect the filtering unit to the power supply.
Fig. No.5
– STRONG-5000-S – Connection Diagram