![Klimair UNOKLIMA XT160 Installation Operation & Maintenance Download Page 29](http://html1.mh-extra.com/html/klimair/unoklima-xt160/unoklima-xt160_installation-operation-and-maintenance_1977761029.webp)
-29-
SLAVE-MASTER AIR FLOW MODE
To get into this mode, repeatedly press the button FLOW (F) to see the image FLOW on display.
When pressing FLOW button the mode will change in the sequence MASTER-SLAVE AIR FLOW,
SLAVE-MASTER AIR FLOW, EXTRACTION, INTAKE, MASTER-SLAVE AIR AIRFLOW…) In this
mode the IMPELLER button (V) is active to select the desired speed.
In this mode the units generate a continuous air flow going from SLAVE-OPPOSITE TO-MASTER to
MASTER or SLAVE-SAME AS-MASTER units excluding heat recovery.
Recommendation:
Recommended to isolate odors in a room, like in the kitchen, generating a continuous air flow towards
it. Suitable for use as cooling in summer season, when external temperature is lower than internal,
there is no need to recover heat only to blow fresh air into the house. By pressing the specific function
button all units will run in the desired direction with the possibility to change the speed as required.
EXTRACTION MODE
To get into this mode, repeatedly press the button FLOW (F) to see the image FLOW on display.
When pressing FLOW button the mode will change in the sequence MASTER-SLAVE AIR FLOW,
SLAVE-MASTER AIR FLOW, EXTRACTION, INTAKE, MASTER-SLAVE AIR AIRFLOW…) In this
mode the IMPELLER button (V) is active to select the desired speed. By pressing the specific function
button all units will run in extraction with the possibility to change the speed as required.
Recommendation:
Recommended mode to extract a lot of stale air, to the disadvantage of the heat recovery, when rooms
are very crowded or warm etc.
INTAKE MODE
To get into this mode, repeatedly press the button FLOW (F) to see the image FLOW on display.
When pressing FLOW button the mode will change in the sequence MASTER-SLAVE AIR FLOW,
SLAVE-MASTER AIR FLOW, EXTRACTION, INTAKE, MASTER-SLAVE AIR AIRFLOW…) In this
mode the IMPELLER button (V) is active to select the desired speed. By pressing the specific function
button all units will run in intake with the possibility to change the speed as required.
Recommendation:
Recommended mode to intake a lot of fresh air, to the disadvantage of the heat recovery, when rooms
are very crowded or warm etc.