-24-
CONFIGURATION RESET
MODEL REMOTE ONLY, in MASTER-SLAVE installation
In case of mistakes in the configuration of the units through dip switches, please follow the instructions:
• Switch OFF the unit through main switch
• Change the configuration of dip switches as needed
• Switch ON the unit through main switch
The unit is properly set with the new configuration
WARNING: By keeping the unit ON, no change of configuration is possible. The unit will continue to
run as per previous setting.
INSTRUCTIONS FOR USE MODEL BASE
Options:
• Turn on and off the power supply on the I:0 switch
• Select speed 1 or speed 2 on the I:II switch
The product runs 70 seconds in extraction and 70 seconds in intake reversing the cycle with open
tilting front panel.
The tilting front panel will open in 40 seconds.
ON/OFF switch and speed selection can be controlled by remote as per connection diagram described
in the previous paragraphs (Not included).
I
0
I
II
