-28-
NIGHT MODE
To get into this mode, press the button NIGHT (N) to see the image NIGHT on display. In this mode all
units will run at the night speed with heat recovery until another command is entered.
Recommendation:
Recommended mode when the external environment is very quiet and even the minimum speed of
the unit is perceived.
TIMER BOOST MODE
To get into this mode, repeatedly press the button TIMER (B) to see the image TIMER on display. By
pressing the TIMER button in any of the modes all the units will run in extraction at the maximum speed
for 20 minutes. At the end of the cycle they will resume the previous set mode.
Recommendation:
Recommended mode to quickly extract unhealthy air or strong odors without the need to set again the
units afterwards.
MASTER-SLAVE AIR FLOW MODE
To get into this mode, repeatedly press the button FLOW (F) to see the image FLOW on display.
When pressing FLOW button the mode will change in the sequence MASTER-SLAVE AIR FLOW,
SLAVE-MASTER AIR FLOW, EXTRACTION, INTAKE, MASTER-SLAVE AIR AIRFLOW…) In this
mode the IMPELLER button (V) is active to select the desired speed.
In this mode the units generate a continuous air flow going from MASTER or
SLAVE-SAME AS-MASTER units to SLAVE-OPPOSITE TO-MASTER excluding heat recovery.
Recommendation:
Recommended to isolate odors in a room, like in the kitchen, generating a continuous air flow towards
it. Suitable for use as cooling in summer season, when external temperature is lower than internal,
there is no need to recover heat only to blow fresh air into the house. By pressing the specific function
button all units will run in the desired direction with the possibility to change the speed as required.
