-26-
AUDIO-VISUAL SIGNALS
•
When a command is received it makes a “BIP” sound and the LED will flash white.
•
Surveillance mode: When the product is in surveillance mode the red LED blinks every 60sec.
•
Humidity alarm: When the unit gets into humidity alarm the red LED will light up.
•
Filter Alarm: When the unit gets into filter alarm the red LED will light up.
WARNING:
When turning on the unit the first time, and when passing from stand-by or switch OFF to switch ON,
the tilting front cover will take 40 seconds to open.
NOTE:
The meaning of “heat recovery operation” corresponds to standard operation of the product i.e. 70
seconds in extraction and 70 seconds in intake reversing the cycle with open tilting front cover.
BUTTONS FUNCTION LIST:
AUTOMATIC MODE
To get into this mode, repeatedly press the button MODE (M) to see the image AUTO on display.
When pressing MODE button the mode will change in the sequence
(AUTO, SURVEILLANCE, MANUAL, AUTO, SURVEILLANCE...)
In this mode the HUMIDITY button (H) is active to select the desired threshold. In this mode both
humidity and twilight sensors are active, the units will run by themselves without the need to give
commands.
Hereinafter explaining how the units run in different situations with related operating mode:
•
In standard humidity conditions during the day the units run at the medium speed and with heat
recovery.
•
In standard humidity conditions during the night the units run at the minimum speed and with heat
recovery.
•
In case of humidity alarm during the day the units run in extraction at the medium speed.
•
In case of humidity alarm during the night the units run in extraction at the minimum speed.
The units get into humidity alarm when the MASTER unit detects a humidity level higher than the set
threshold among the three values available (40%, 60%, 90%).
Recommendation:
For standard use of the product; once the humidity level is set, the system will run by itself without the
need of any further action.
