www.klever-mobility.com
www.klever-mobility.com
6
7
Introduction
1. QuickStart
Dear customer,
On the fi rst pages you will fi nd instructions for a QuickStart
with your new Klever 25 km/h E-bike. For more technical
information read the additional instructions on the following
pages. Should you have any further questions, please ask
your local Klever dealer or contact our technical hotline. The
hotline’s contact details are to be found in chapter 2. and at
the end of this manual.
Enjoy your Klever 25 km/h E-bike, we wish you a lot of fun,
The Klever Mobility team.
Image 1.1
Introduction
Safety check
Before starting your E-bike always check the operation of the
brakes and the tyre pressure.
Launch of the electric drive
You can start the system with or without inserting the
dedicated E-KEY (image 1.2). Check for the function of the E-KEY
section 5.4.3. Menu & submenus for settings. As soon as you
insert the E-KEY into the display, the system will be activated
and will start itself. With the E-KEY already in the display while
the system is off , there are two ways to activate the system:
1. Press the on/off button
(image 1.3), after a 3 seconds
system check your E-bike is ready to be pedalled.
2. Or just start pedalling and the electric system will
wake up automatically.
After a 3 seconds system check, the
electric drive will start to support.
N
No support, electric
system active
ECO
Low support
TOUR
Medium support
MAX
Strongest support
The
á
(TURBO) button on the display has
2 functions:
1. Walk-assist:
actuate the
á
(TURBO) button while
walking next to your E-bike. The maximum speed is 4
km/h.
≤ 4 km/h
Pushing aid while
taking your
E-bike by the hand.
2. TURBO-mode WITH pedalling
of the cyclist. While
actuating the
á
(TURBO) button in ECO- or TOUR-
mode the electric support will be increased to MAX-
mode.
≤ 25 km/h
Additional support
while riding hills or
strong headwinds.
Image 1.2
Image 1.3
E-KEY
