www.klever-mobility.com
www.klever-mobility.com
18
19
Klever’s E-bike drive train
Please note! These 2 options will only function while
you keep the
á
(TURBO) button pushed. As soon as you
release the
á
(TURBO) button, the electric motor support
will stop. Except in the latter case of pedalling: in that
case after releasing the
á
(TURBO) button the level of
electric motor support will go back to the preselected
level (TOUR as in the example of scenario 2).
In order to save battery power, the support level will
automatically be limited to the TOUR level when the battery
capacity drops to 10%. When the battery capacity drops to 5%
the support level will be limited to the ECO level and in the
case of a battery capacity of 2% or less the level will be N. No
pedal assistance, but the electric system remains active for
lighting, display, motor locking and alarm.
5.3 Recuperation of battery capacity:
regeneration
The Klever BIACTRON system has a unique feature: the recovery of
battery capacity, also known as regeneration. Every time the drive
system goes into freewheel, coasting mode, the BIACTRON system
will start braking the motor. The motor friction is being converted
into electricity that is being restored into the battery. The freewheel
mode starts once you do not pedal and roll out to a traffic light or you
coast down a hill or mountain without having to pedal.
Section 5.4.3 (Menu for settings) explains how this function can
be activated and adjusted to your personal preferences. The
regeneration function is a nice addition to the consumption
and range of your battery. The more and longer you ride in a
mountainous environment, the more you will benefit from this
function. However, the recovery of electricity is limited and depends
to a large extent on your riding behaviour, the environment and the
chosen regeneration settings.
Klever’s E-bike drive train
( )
( )
Info (•)
Image
5.3
Support level
details
Support
level name
High/low
beam lights
E-Key
indicator
Power
consumption
Regen power
General warnings
* Visit your dealer if the
warning signal continues
to appear on the display
Bluetooth
Warning
icon
LIGHT
Power
ON/OFF
Battery
indicator
E-KEY port
Current
speed
D-Info
5.4 Display
With the display you start and control the BIACTRON-system.
Upon purchase your Klever dealer will pair the E-bike with a
set of two E-KEYs with a unique ID code. After the pairing your
E-bike will only function and start with these E-KEYs with the
dedicated and programmed ID code. It is impossible to activate
your E-bike with other E-KEYs from other bikes.
Now you can start the system WITH or WITHOUT
inserting the E-KEY (see section 5.4.3).
Every press of a display button will be confi rmed with a short
acoustic signal. As soon as you insert the E-KEY into the display
(image 5.4), the system will start. With the E-KEY already in the
display while the system is off , there are two ways to activate
the system:
1. Press the On/Off button
(image 5.3), after a 3 seconds
system check your E-bike is ready to be pedalled.
2. Just start pedalling, the electric system will wake up
automatically.
After a 3 seconds system check, the electric
drive will start to support.
E-KEY
Image 5.4
Turbo
(
á
)
