Klemsan TES-4, User Manual

Page: 8 / 35

2.2 Configuring TES-4
Figure 2-2 Gateway Master over USB
Transparent Ethernet /
Serial Gateway
TES
Transparent Ethernet /
Serial Converter
8
SECTION 2 DEVICE SPECIFICATIONS
TES
Ethernet Port:
Ethernet cable must be inserted.
USB Port:
Micro-USB cable must be inserted to this port. Device can power on with USB port as
well. If operator wants to use Gateway Master must be connected to PC over micro-usb
cable. The firmware of the device can also be updated via the USB port.
RS-485 Interface:
Connection of the serial devices are made through these terminals.
There are two options when TES-4 is configured.
1)
Using Gateway Master software over USB port. (will be explained in “Section 3”)