Klemsan TES-4, User Manual

Page: 15 / 35

3.1.1.1 Network Setting
Figure 3-3 Network Settings
Transparent Ethernet /
Serial Gateway
TES
Transparent Ethernet /
Serial Converter
1 5
SECTION 3 CONFIGURATION SOFTWARE
TES
In this tab, the network settings of TES are made:
NOTE: After the connection, “Device Information”, “Serial Configuration”, “Network Settings”,
“Gateway Configuration”, “About”, “Disconnect”, “Read” and “Write” tabs will be enabled and
they will be visible on the tabs concerning up-to-date configuration settings of the connected
device. TES must not be disconnected from the USB without clicking the “Disconnect” button.
”Security Configuration” will be enabled when connected via ethernet.
Figure 3-2 COM Port Selection