6
GPRS/SerialGateway
1.2 Proper Use and Safety Conditions
l
Installation and connections should be established in accordance with the
instructions set out in the manual by authorized persons. Unless the connection is built
properly, device should not be operated.
l
Before wiring the device up, make sure that energy is cut off
l
Use a dry cloth to remove the dust from the device/clean the device. Avoid using
alcohol, thinner or a corrosive material.
l
Device should be engaged only after all the connections are made.
l
Do not open the inside of the device. There are no parts which the users can intervene inside.
l
Device should be kept away from humid, wet, vibrant and dusty environments.
The manufacturing company may not be kept responsible for unfavorable incidents
that arise out of the failure to follow the above cautions.
1.3 Connections and Micro SIM Card Placement
Supply voltage should be applied to GTOR within the range of 11 ... 30VDC.
RS485
Reaktif Güç
Kontrol Rölesi
Reaktif Güç Kontrol Rölesi
Figure 1-2 USB
Figure 1-3 Micro SIM Card
Figure 1-4 Antenna
_
+ 11...30VDC
Summary of Contents for GTOR-4
