16
GPRS/SerialGateway
3.3 GSM Information
This tab contains information on IMEI number, Operator name, RSSI (Signal strength),
BER (Bit error rate) and SIM card IP address(GPRS Ip).
NOTE:
If accessing to the SIM card IP address (GPRS IP) via USB is required, the device
supply terminals must be energized to activate the GPRS modem.
Figure 3-7 GSM Information
3.4 Serial Port Settings
In this tab, the serial communication settings of GTOR are made. The values in this tab
must be selected in accordance with the serial interfaces of the MODBUS network. If these
values are not set according to the MODBUS network, a healthy serial communication
will not occur.
GTOR’s default serial communication settings are:
Baud Rate 38400
Stop Bit 1
No Parity
Figure 3-8 Serial Port Information
SECTION 3 CONFIGURATION SOFTWARE
NOTE:
If signal;
-113 dB <RSSI ≤ -101 dB
(0% signal quality)
-99 dB <RSSI ≤ -93 dB
(25% signal quality)
-91 dB <RSSI ≤ -85 dB
(50% signal quality)
-83dB <RSSI? -77dB
(75% signal quality)
-75 dB <RSSI
(100% signal quality)
Summary of Contents for GTOR-4
