RPTR-OBA/734
Installation Manual
REV: B (04/25/2022)
33
5.
Insert H4 & H11 (stacked) into the square hole and orient the threads to face outwards of the
frame rail through the circular hole as done in the previous step.
6.
Place RAPTOR-310 foremost mounting hole over the hardware and install H8, H10, H13 in the
stacking order noted in the beginning of this section. Reference the following figure.
Figure 39- RAPTOR-310 Fully Installed
7.
Torque mounting hardware to 75-88 in-lbs.
