RPTR-OBA/734
Installation Manual
REV: B (04/25/2022)
24
7.3
Compressor Installation
The following hardware is used in this step:
•
Item 1 = Compressor
•
All included hardware and components inside the compressor box
Use the below stacking order for installation of the compressor.
Figure 23- Compressor Hardware Stacking Order
1.
Use the instructions included in the compressor box to install the air filter media into the air
filter housing.
2.
Install the air filter onto the inlet of the compressor. Alternately you may install the air filter
remotely using the instructions included in the compressor box.
3.
Place the compressor onto the RAPTOR-110 bracket, with the head of the compressor toward
the rear of the vehicle as shown.
Figure 24- Compressor Installation
4.
Install the compressor onto RAPTOR-110 using the hardware included in the compressor box.
Insert the hardware from the underside of the bracket as shown in the above figure.
5.
Torque the hardware to 20 in-lbs.
