RPTR-OBA/734
Installation Manual
REV: B (04/25/2022)
14
6
Bench Assembly
Complete the following steps off vehicle to facilitate final installation.
6.1
Install Air Fittings
Gather the air fittings for installation on the following components (as applicable):
•
Air Tank
•
1302 Quick Connect Bracket
•
INF-1 Inflator Kit
•
Air Horns
Apply two drops of Item 13 (JUICE) to each male pipe thread before installation.
Hand-tighten each fitting, then further tighten ¼ to ½ turn as necessary to match the
fitting orientation shown in the below figures.
6.1.1
Air Tank Fittings
Attach air fittings to the tank per the below figure.
Figure 5- Tank Fitting Installation
6.1.2
1302 Quick Connect (On-Board Air)
1.
Attach air fittings per the below figure.
2.
Reference the 1302 Remote Quick Connect Instructions at
Figure 6- 1302 Quick Connect Assembly
