JT-OBA/220
Kleinn Air Horns
INSTALLATION MANUAL
REV: C (6/25/2021)
19
7.4
JT220: Disassemble Horn Drivers from Air Horns
1.
Remove trumpets from drivers and set aside.
a.
Tightly grasp trumpet with both hands and unscrew counter-clockwise. Trumpet may be very
tight.
7.5
JT220: Attach Horn Drivers to Horn Bracket (JT-200)
1.
, &
to attach horn drivers to the bracket, as shown.
Figure 6: JT220 Horn Drivers Installed
2.
Pre-wire the horn driver solenoids and connect the solenoids using the provided T-compression
fitting. Connect full length of included 1/4" hose to T-fitting (yellow) (to be routed later) See
for wiring instructions. Example shown below.
Figure 7: JT220 Horn Driver Prewire and T-Fitting
