JT-OBA/220
Kleinn Air Horns
INSTALLATION MANUAL
REV: C (6/25/2021)
18
7.2
Assemble Rubber to Tank Mounts & Tank Straps
1.
Rubber is applied to the tank mounts and tank straps to prevent excessive wear and noise. Apply
rubber stripping as shown:
Tank Mount
Figure 3: Tank Mount Rubber
Tank Straps
Figure 4: Tank Strap Rubber
2.
Form the tank straps by hand-bending them around the body of the tank.
7.3
Assemble Compressor to OBA Bracket
1.
Use hardware provided with the compressor to mount the compressor to the OBA bracket as
shown. Ensure that the extra length of the bolt is facing up. Note orientation of compressor head
on OBA bracket.
Figure 5: Compressor Install
