Component replacement and adjustment
procedure
7.7
Lower element substitution
1.
Disconnect the power supply cord
and remove the Oven from the
cabinet.
2.
Remove the rear covers.
3.
Disconnect the terminals of
heating element.
4.
Remove the screws near the
external terminals and the other
four on the brackets.
5.
Remove the brackets.
6.
Pull out the lower element.
7.
Replace the new element by
reversing the previous steps.
8.
Pay attention to the positioning of
the element.
9.
Connect the terminals.
10.
The connections must not be
loose.
11.
Reinstall the Oven into the
cabinet.
12.
Reconnect the power supply cord
after the Oven is installed.
13.
Run the Oven and check all
functions.
