Checking of latch mechanism system.
Activate the Self Cleaning be sure that the door is closed: the lock door motor starts and the padlock
symbol on the temperature display flashes for as long as the motor it is moving. When the system
reaches the locked door position the padlock stops flashing. Check that the door is properly blocked.
At this point, turn off the self Cleaning function by tapping the [
H
] key : the padlock begins flashing and
the door lock mechanism until it is unlocked. When the padlock symbol is definitely off to check that the
door is completely unlocked.
Warning: The motor continues to move even if the door is open, there is no any micro-switch to evaluate
the position of the door.
The lock symbol (
) on the display is:
ON
When the door is fully locked
OFF
When the door is fully unlocked
FLASHING
When the latch mechanism is moving. (After self clean the symbol will flash until the
temperature will be safe and the door
unlocked).
