Component replacement and adjustment
procedure
7.8
Lock door motor substitution
1.
Disconnect the power supply cord and
remove the Oven from the cabinet.
2.
Remove the upper cover.
3.
Remove the rear cover.
4.
Disconnect the cables. Pay attention to the
sequence of wiring of the motor (micro).
5.
Remove the lateral screws and internal
attachment screws.
6.
Disassemble the motor by removing the two
screws and remove also the brackets.
7.
Replace the new by reversing the previous
steps.
8.
Pay attention to the positioning when
inserting the door lever.
9.
Connect the terminals.
10.
The connections must not be loose.
11.
Reinstall the Oven into the cabinet.
12.
Reconnect the power supply cord after the
Oven is installed.
13.
Run the Oven and check all functions.
