3.11 Removing Magnetron
1. Disconnect the leadwire from the high voltage transformer and
high voltage capacitor.
2. Remove the air guide.
3. Carefully remove the mounting screws holding the magnetron
and the waveguide.
4. Remove the magnetron until the tube is clear from the waveguide.
Waveguide
Magnetron
Gasket
Magnetron
Dome
Waveguide
Bracket
Magnetron
3.12 Removing PCB Assembly
1. Remove the control panel assembly from the cavity.
2. Remove the screws which hold the PCB to the
3. Diconnect the flat cable from the PCB and take off the PCB.
control panel.
Page 12
