3.3 Removing Outer Case
1. Disconnect the power supply cord from the outlet.
2. Remove the screws from the rear and along side edges of the
3.4 Removing Power Supply Cord
1. Remove the outer case.
2. Disconnect two terminals, and remove one screw of the earth
terminal.
case. The outer case must be moved backward to be lifted off.
3.5 Removing Control Panel Assembly
1. Disconnect the leadwire from the PCB sub assemble
2. Remove the screws for securing the control panel.
3. Lift control panel assemble from the oven by the tab unhooked.
.
3.6 Removing Door Assembly
1. Open the door.
2. Remove two screws holding the Hinge to the cavity Assembly.
CAUTION : Be careful not to damage Door C by screwdriver.
3. Lift up and pull the door.
Remove door Assembly
Remove door Assembly
Page 10