3. 1
Removing Turntable Motor
3
1. Remove the glass tray.
2. Remove the pully shaft VERY CAREFULLY.
3. Lay the unite down on its back.
4. Remove the turntable motor cover.
The turbtable base cover is easily removed by pinching the six parts
with a wire cutting.
5. Disconnect the leadwire from the turntable motor terminals.
6. Remove the screw securing the turntable motor to the oven cavity
assembly.
7. After replacing the motor, rotate the removed turntable motor cover.
8. Fit the turntable motor cover s projecting part to the base plate slit.
NOTE:
’
1. Remove the wire lead from the turntable motor VERY CAREFULLY.
1. Be sure to grasp the connector, not the wires, when removing.
Page 13
Remove Turntable Motor
