Kleenmaid DW6010, Service Manual

Page: 24 / 52

Fill system operation
PRESSURE SWITCH CONTROLLED FILL SYSTEM
1- AIRBREAK 2- WASH WATER LEVEL 3- TUB 4- AIR TRAPS
5- WATER SOFTENER 6- RESINS 7- SALT 8- TRAY
1
AIRBREAK
A
FILL SOLENOID VALVE
2
FILL SOLENOID VALVE
B
REGENERATION SOLENOID VALVE
3
WATER SOFTENER
C
SOFTENED WATER
4
TRAY
D
WATER
5
WASH LEVEL
E
RESINS
6
TUB
F
SERVICE PRESSURE SWITCH
7
AIR TRAP
G
SAFETY GROUP
8
RESINS
H
AIR
9
SALT
I
SALT
ELECTRICAL IMPULSE:
Operation:
When the cycle starts, the fill SV opens, the water enters the AIRBREAK and, after going ''up
through the air gap'', it enters the resin compartment of the WATER SOFTENER. The softened
water then enters directly in the TUB through a side opening in the SUMP. As the level of water in
the tub increases, so does the pressure in the AIRBREAK which is connected directly to the LEVEL